Audit
Vulnerability assessment for IT and OT
Which known vulnerabilities are open in your IT and OT network? We scan your systems completely and have experts evaluate the results, instead of handing you an unfiltered scanner list.
Free and without obligation. You will receive your proposal within 48 hours.
Our vulnerability assessment services
With our technical scans, we check your entire IT or OT network:
- Scans of your IT and OT network for known and new vulnerabilities
- Internally in your network or externally via the internet
- Approach based on NIST, OWASP and OSSTMM
- Expert evaluation of the results and risk rating
- Combination with a penetration test for the highest-risk systems
Your vulnerability scan results
You receive a report in which experts have evaluated every result:
- Detailed report with all vulnerabilities
- Objective risk rating and prioritised measures
- A basis for technical requirements and security concepts
How your vulnerability assessment works
The scan runs at a time agreed with you:
- Initial conversation: systems, networks, internal or external.
- Your proposal with scope and approach
- Scan at the agreed time.
- Analysis and report.
- Discussion of the measures.
Why Securitects
- No unfiltered scanner list: experts evaluate every result and prioritise by risk
- IT and OT, internal and external: including control networks, with particular care for OT systems
- Based on recognised standards: NIST, OWASP and OSSTMM
- Targeted depth: on request, we test the highest-risk systems with a penetration test
More about our team and its qualifications
Frequently asked questions about the vulnerability assessment
The vulnerability assessment finds known vulnerabilities across the breadth of your systems. The penetration test goes into depth and checks whether and how far an attacker can exploit them.
Regularly, because new vulnerabilities become known all the time. We recommend aligning the frequency with your risk and your patch cycles, and we agree it with you.
No. You receive a report in which our experts evaluate the results and prioritise them by risk, with concrete measures.
We agree the timing and intensity with you. With OT systems, we proceed with particular care. The IEC 62443 GAP analysis shows where your OT as a whole stands against IEC 62443.
The cost depends mainly on:
- Number of IP addresses, systems and network segments
- Internal scan, external scan or both
- Share of OT systems, which we test with particular care
- One-off scan or regular repetition
Because experts evaluate every result, the analysis is also part of the effort.
The external scan checks via the internet what an attacker sees from outside: firewalls, VPN access points, web servers and other publicly reachable services. The internal scan runs in your network and shows which vulnerabilities an attacker could exploit after an initial intrusion, for example via a phishing email. These include outdated servers, clients and network components. For a complete picture, we recommend both.
Yes. In Annex A, control 8.8, ISO 27001:2022 requires the management of technical vulnerabilities. In Article 21, NIS‑2 explicitly names vulnerability handling and disclosure as part of risk management. Regular scans with an evaluated report document that you identify vulnerabilities and treat them according to risk. You can feed the results directly into your ISO 27001 ISMS.
Your IT team fixes the vulnerabilities in the order of risk set out in the report, usually through patches, configuration changes or disabling services that are not needed. In the discussion, we clarify open questions about implementation. A new scan then confirms that the gaps are closed. A fixed scan schedule keeps your status up to date, and you can also have particularly critical systems tested in depth.
Start your vulnerability assessment
In the free initial conversation, we define the scope of your vulnerability assessment with you.